Best places to keep your gun at home
When deciding what place is safest to store a weapon in your house you quickly realize that there is no perfect hiding spot because it depends on many factors that pin us into tough choices. Like having to choose between always keeping your gun within arms reach or storing it in a safe where it is sure to be out of reach of anyone but you. Or like making the decision of having your gun always loaded and ready to go, as opposed to keeping your weapons in a room separate from your ammunition and body armor.
People who like to keep their guns in drawers, nightstands, and between mattresses argue that in the occasion of a break-in the speed in which you can be armed and ready not only gives you the advantage but decreases the chances of getting caught off guard. Yet, choosing to leave guns strewn about your house does increase the risk of you inadvertently arming your home invader which can leave you in a tougher spot. Another aspect to consider is if to leave your gun cocked; people for it tend to feel safer knowing that fine motors skills is the first thing you lose when the adrenaline starts kicking in, so loading a gun could be an issue for some when in highly stressful situations. Those against propose the argument that cocking the gun not only gives out a warning sound (which could save you the trouble of actual confrontation) but gives you more time to gather your wits before you make any final decisions. As Wyatt Earp once said, “Fast is fine but accuracy is final. Learn to shoot slow in a hurry.”
For some, keeping a loaded weapon close by at all times is not an option. People with children or those who would rather have their guns in a more secure location tend to favor safes. These can range from a small one or two weapons safe, to large ones built to house rifles and body armor as well. But with all gun strongboxes comes the same issue; in the event of a break-in, accessing and arming yourself in time could prove to be a challenge. Considering how a split second can make a world of difference, choosing to keep everything locked in a safe can be a secure yet risky option. Another potential drawback to safes is how expensive it can get to purchase and install some of them, but for people with collections or invaluable weapons this might be the most ideal way to go in terms of safekeeping. Some also reject the idea of safes since they can be specifically targeted by intruders, so a market for concealed safes has a rise in options like fake furniture, ornaments and regular household items that can conceal weapons around their home.
Technology has definitely benefited gun owners recently given the fact that we can now have access to higher grade protection for weapons than ever. Ranging from trigger locks that prevent unintentional discharges to fully customizable gun locks that feature thicker steel, resistance to fire damage, electronic locks, quality upholstery and even fingerprint recognition. With all this technology available there is little excuse for not being protected, but the most important thing to figure out is.. What s your ideal protection?
Security Personnel and Body Armor
The body armor and security industries are two closely interdependent trades. On one hand there’s the ballistic protection market which, fueled by the security industries never ending need for the latest improvements in bullet and stab resistance, continues to implement the latest technological advancement in engineering to further decrease the chances of serious injury or death. Considering those, there is the security industries constant growth; which nowadays ranges from shopping malls to high profile government institutions. All of the vastly different areas of operation entail varying levels of threat. For example, the dangers a bar security employee might find himself faced with are mostly stabs and low caliber guns; yet on the other hand an armored vehicle security guard might be more inclined to use a much higher grade of body armor that also protects against assault rifles and sub-machineguns. In some sectors of the security industry, other lesser-known types of vests are used like covert armor carriers, which provide a discrete fit, and are often times concealed completely. This concealability comes along with a lighter overall weight and the inherent flexibility of Kevlar plates. This lightweight armor is usually worn beneath layers of clothing and is mostly used for securing private parties, high-end nightclubs or VIP protection scenarios.
One of the sectors that has arguably seen the largest growth in semi-private security has university campuses. Given the unfortunate reality that school shootings have been at an all-time high, some colleges have begun to adopt higher measures of security for the protection for their staff and students. Campus security face many dangers on the job and some tasks are not necessarily recognized. Beyond the basic “speeding on campus” traffic stops and all of the drunken bar fights, public intoxication and indecent exposure that tend to be a regular part of the college party scene. Some of the basic tasks of any university officer are to conduct daily and nightly patrols of buildings for anyone of ill intent. Their job also forces them to confront and questions the presence of any stranger on campus that may seem like a risk to himself or others, knowing and spotting suspicious behavior is key to this part of the job. Most officers are even trained to detect the presence of religious extremism and the recruitment strategies commonly used on young students. While most of the day-to-day interactions for campus and local police are relatively benign, Campuses tend to attract other more serious dangers like car chases, drug dealing, armed robbery, bomb threats and even mass shootings. So while it may seem like Campus PD’s do not need a lot of protection, very serious threats can arise out of nowhere, so it is better to be prepared for the worst.
Ultimately, all security jobs require specific gear, and when acquiring your ideal piece there must be a certainty of the threats and situations that protective armor will be exposed to. Ideally, managers should consider the most suitable options in order to assure their staffs safety on the job. Moreover, since there still is not a thing as a bulletproof officer, it is up to the people in the industry to strive for improvement and advancement in a field only limited by imagination and time.
Should body armor be legal?
Is there such a thing as Overprotection?
When considering how precious and delicate life can be, one is often confronted with questions like, do I feel safe? Am I being prepared? Is there such a thing as “too prepared?” The most common conclusions tends to be that no matter how protected you are, you are not bulletproof. And nowhere less is that the case than in states like Connecticut, where state laws have been passed that directly confront the second amendment. These laws severely criminalize the buying and selling of protective body armor by any means that is not a person-to-person transactions. As a direct consequence, Public Act 98-127 not only restricts civilians’ access of life-saving protection but also directly affects law enforcement and military personnel, who depend on catalog or online bulk transactions, from acquiring an indispensable part of their gear. Why does that matter in Florida, or any other of the 49 states, you may ask. With New York following Connecticut’s footsteps and queuing up a few body armor restrictions this year the picture could not be clearer since some other anti-gun states are expected to jump on the bandwagon against self-protection for all the wrong reasons. The main drive behind these attempts to forcefully restrict the American people of their constitution given right is the general disarming of America with school shootings bearing the burden of being the excuse.
“The people intent on committing these atrocities outfit themselves with the macabre tools of their trade … and the defensive gear to ensure they do the most damage,” says Josh Sugarmann, executive director of the Violence Policy Center. A D.C.-based gun control research organization.
Although Mr. Sugarmann attempts to make a solid point about how the use of protective gear can, in some situations, hinder police’s attempts at controlling a situation since the criminal can be better protected against police force. To stop the main concern, criminals being better protected from law enforcement, some states have made it illegal for a person with a criminal record ranging from a simple misdemeanor to anyone that has been incarcerated from ever attempting to own any type of body armor or weapon. While this might put a dent in most former criminals attempts at acquiring protection there are still a wide variety of known ways you can acquire bulletproof protection illegal through the internet. So are these laws really helping the public (which should be their sole intention) or are they inadvertently just making it harder for the common law-abiding citizen American to take their safety into their own hands.
Should these restrictions continue to spread across the states we could inevitably find ourselves at a point where choosing protection based on your personal needs will be a thing of the past and only an option for certain law officers and active military personnel; confining citizens to a very limited and compromising number of options for self-preservation. In a country built on the foundation of freedom, having limited options for protections seems to directly interfere with that fundamental right. So does body armor hurt people? Of course not, their invention came from the need to preserve life and minimize injuries. And taking into account that police scanners, radar detectors and night vision binoculars are still 100% legal, we can only ask ourselves; Are we focusing on the problem at hand? Or just demonizing an important life-preserving tool in order to feel a little “safer.”
Why buy a rifle Plate?
In an increasingly dangerous world, the need for body armor has become established. Yet, the question remains, what type of bulletproof plates should I be running in my carrier?
The first parameter that needs to be determined is what ballistic rating is necessary for the situations that the vest will be used for. Like everything in the tactical world, there is a compromise to be made between capability and mobility. Everyone would like to be running around in armor that will stop the 30mm depleted uranium rounds fired from an A-10, but that just is not practical. The compromise between toughness and mobility is the primary discriminating factor between bulletproof vests and the various materials that they are constructed from.
Why do the Police use Kevlar?
The Kevlar vests utilized by police forces around the world represent the greatest such compromise in the market today. Kevlar vests are light, flexible and easy to wear all day without hindering movement all that much, though they have a fatal flaw. Even the lightest rifle rounds and even some fast moving pistol calibers easily defeat Kevlar vests. Therefore, while they may be called ‘bulletproof’ vests, in reality they are vulnerable to a large percentage of all firearms ever made. Yet, Kevlar makes sense for police departments. Most of the work that they do involves chasing down criminals and having to be ready at a moment’s notice to respond to anything. In such a scenario, having a light comfortable vest that can easily be worn all day makes more sense than a heavier more rigid rifle rated vest. Especially considering police forces are overwhelmingly faced with pistol fire and are often at the tip of a first response spear that includes medical teams that can deal with the physical trauma associated with being shot in a soft vest.
Rifle plate has its own very important niche, both for its protective ability, and some other attributes that you may not be aware of. The most obvious benefit in buying and wearing rifle plate is the advanced, acute-trauma free, protection against all varieties of handguns as well as protection against common rifle fire, including the world’s most popular assault rifles and intermediate sniper fire. Having a solid steel or ceramic plate as opposed to a soft Kevlar reduces the internal damage caused by stopping a bullet in its tracks. A hard plate distributes the force across the entire chest instead of a few inch diameter area. This makes taking hits a much less serious issue. Often times those shot while wearing soft vests still require medical attention to address their broken ribs or even internal hemorrhaging caused by the impact of even minor pistol calibers like 9mm and 380ACP. Should a person be hit with a 44 magnum or similar large-bore hunting pistol round, they still might die from the immense blunt force trauma even if the round is stopped.
The most important attribute of solid-state rifle plate for civilian use however is its longevity. Many are not aware that the Kevlar in soft vests has an expiration date of only a few years, and must be replaced every time it is shot. AR500 plates on the other hand, as long as they retain their protective coating and do not rust can last indefinitely. This makes them much more economical for a prepping solution as they do not have to be replaced, while providing the maximum ballistic protection available. Should they ever need to be used, their additional weight and in-flexibility will likely be a minor annoyance compared to whatever threats they are being brought out against.
What is Spalling and How Dangerous is it?
When it comes to shooting steel, certain precautions need to be observed in order to protect oneself and bystanders from the lead fragments that inevitably bounce off the steel plate. These fragments, collectively, regardless of size, are referred to as “spall”. Now these fragments can be dangerous, they ‘bounce’ off the steel at considerable speed and can sometimes have enough mass to cause injury. The most dangerous form of spall is not really spall, but rather a “ricochet”. Luckily, spall is relatively easy to predict and therefore can be avoided.
When shooting at a steel plate, the spall typically deflects off the plate at around a 20-degree angle. Thus, one can imagine a “cone of danger” with the point at the bullets point of impact and spreading out from the plate at a 20-degree angle. So when adhering to the safe 180 rule at the range, shooting steel poses little to no risk because no one should be at a 20 degree angle to the target. Problems arise however when targets become damaged either through pitting or bending. This can radically change the behavior of the projectile lead compared to a flat plate. There have even been reports of nearly intact projectiles coming back directly at the shooter because of old bent targets. The pitting issue is primarily caused by the plate being shot with either too fast of a caliber, or with steel core or similarly hardened core projectiles, neither of which would have been recommended for use by the manufacturer.
Because rifle rounds contain so much more energy and velocity compared to their pistol counterparts, often steel target manufacturers list specific “minimum distances” for certain rifle calibers to be used with their targets. The reasoning behind this is twofold. First, the increased distance allows the projectile to slow down through air resistance so that it hits the plate with less energy and velocity, which will impart less damage on the target. Secondly, any fragments that come off a plate from a rifle caliber will be traveling much faster and carry much more energy than one from a pistol round. The increased distance reduces the likelihood of shrapnel hitting the shooter as well as allowing air resistance to act on the fragment reducing the amount of energy it carries and thus the damage it can cause.
So how does this apply to AR500 bulletproof vests?
The number one reason why people are concerned about spalling is that they are thinking of buying an AR500 or similar steel plate and trying to decide whether the “anti-spall” coating is worth the extra money. Anti-spall coatings are typically just truck bed-liner sprayed on very heavy. The most important consideration if you are planning on going to spend the extra money is to make sure the manufacturer applies enough of it for it to actually work. Given enough thickness, anti-spall coatings absorb near 100% of lead fragments for the first few rounds.
However, spending the extra money per plate often allows for the purchasing of a ceramic or other composite that does not have spalling issues. Moreover, the reality is that most spall will eject away from the surface of the plate at an angle such that it does not hit the user, and any few bits that do are typically trapped by the carrier itself. At the end of the day, AR500 and steel plates are the most cost effective option because they stop the highest threat rounds, repeatedly, for pennies on the dollar compared to ceramics. There is little need to worry about spall because at the end of the day, if you have to deal with spall, you just took a round center mass, you have more immediate issues that require your attention.
What defines “bullet-proof”?
The classical definition of “bulletproof” is typically presented as an object’s imperviousness to bullets. With the variety and often overwhelming power of modern munitions, making something impenetrable to every possible munition is impractical. When it comes to wearable bulletproof armor, having something that offers maximum protection while maintaining complete mobility requires some degree of compromise. At least it used to.
The government authority that sets the standards for ballistic armor is the National Institute of Justice (NIJ). The NIJ thoroughly tests every vest upon its introduction to the market using their rigorous standardized laboratory methods. The NIJ first started doing these tests to determine which vests would be good enough for police officers and other law enforcement. Since then, the NIJ rating system has become the industry standard for law enforcement, military, and commercially marketed vests. Every vest is given a protection rating which describes what kinds of cartridges the vest is capable of stopping. The ratings serve as a convenient guide to classify and quantify the ballistic capabilities of each vest model.
Level I is only rated for rimfire and archaic cartridges, which are so rare in self-defense situations that no vests are commercially sold with a Level 1 rating. Level IIA describes a vest that is capable of stopping handgun velocity 9mm and other common slow velocity pistol cartridges such as .40 S&W. Level II offers protection against faster moving pistol calibers such as 357 Magnum and pistol calibers shot from carbines. Level IIIA is the highest rating Kevlar vests have been able to achieve thus far. These vests can stop nearly anything fired from a pistol, but they leave their wearer completely exposed to any variety of rifle calibers as well as some of the more exotic armor piercing pistol calibers such as 5.7x28FN. In the past, in order to get full Level III protection, which includes rifle calibers, one would have to spend an exorbitant amount to get hard armor capable of stopping even the lightest rifle cartridges. Because of the inferior steel used in these older vests, they would have to utilize thick, heavy plates in order to offer protection even against some of the more common rifle cartridges. With modern steel processing and hardening methods, it is now possible to get ballistic plates rated beyond Level III+, which is capable of stopping round more powerful than the .308 ball used to certify standard Level III. Level III+ exceeds the standards set by the NIJ and is vastly superior to the common vests used by law enforcement and even most military personnel.
If you’re interested in having the best available protection from a level III+ vest, The Best Bullet Proof Vest is offering their “Best Bulletproof Vest” on sale now for $299; The Best Bulletproof Vest is rated at NIJ Level III+ so it is more than capable of stopping any full power rifle round one might encounter.
The Disadvantages of Ceramics for Ballistic Armor
Advanced ceramics took the materials industry by storm in the early 90’s as the wave into the future. They are often lightweight, strong, and impervious to rust or other common forms of degradation. Ceramic plates are currently used by the United States military because of their marginally higher level of protection compared to more traditional materials. Yet despite their often high-tech reputation, when it comes to applications in ballistic armors, they have a few pronounced drawbacks.
While Ceramic ballistic plates can have tensile strengths and hardness levels surpassing hardened steel, they do so at a price. In order to achieve their extreme hardness ratings, ceramic plates become very brittle as a result. In this way, their hardness actually becomes their greatest weakness. In their initial condition, Ceramic ballistic plates offer one cohesive strike surface to catch incoming rounds, as the round impacts the hardness of the ceramic deforms the soft lead, typically aerodynamic bullet into a much flatter mush of semi-molten lead. This now un-fluid dynamic projectile will have a much harder time penetrating through the inner layers of the vest now, so the vest can function and stop the round. As a result of the impact however, the Ceramic often cracks under the great force delivered by the projectile. For each subsequent hit, the ceramic plate has less and less strength to counter the force of the bullet and stop it from penetrating. Ceramic plates have a finite number of rounds they can stop effectively, and typically they must be replaced after each hit.
Ceramic plates are extremely hard to manufacture and often times fail quality control during the production process. Due to the exotic materials required and the failure intensive manufacturing processes, the cost of ballistic Ceramic plates is the highest in the current bulletproof vest market. Per plate, Ceramic plates cost at least 200% more than their steel alternatives. To put our Militaries current ballistic plates in perspective in regards to Cost, a NIJ Level III+ steel plate typically costs around $150, a single Enhanced Small Arms Protective Insert plate used in the US Army’s IOTV(Improved Outer Tactical Vest) can cost up to $600. To put that into perspective, a steel vest with two full AR-500 plates and carrier can be found for only $300.
The combination of their fragility and high cost makes ceramic impractical for civilian purposes. While advanced ceramic plates are rated half a step higher on the NIJ rating scale, the negatives associated with using Ceramic as a bulletproofing material become more pronounced on the consumer level. While the US military has a vast supply network to replace damaged vest on the field. The Civilian does not have this option. Should there be a WROL situation, there is no supply line to get you a new vest should you take a hit, and you would have to work with what you have. The second issue also becomes more pronounced when individually financed. Unlike the Military that has the law of large numbers working on their side, an individual that takes a round to a ceramic vest must pay to replace that vest. If working in dangerous environments, the odds of being hit with a second round increases drastically. Just like car insurance, the rate of incidents rises as the number of incidents rises.
In terms of consumer-level practicality, the durability and cost of traditional steel plates wins compared to the still new ceramics. While this may change in the future, for right now, the simple AR-500 steel plate makes the most sense for bulletproof protection for the everyday civilian.
AR500 Rifle Plate POU
POU, or Philosophy of Use, is a piece of gear’s possible reasonable applications and a short description of how it should be used in those “philosophies”. Coined by YouTuber Nutnfancy, the term POU is useful for cutting through the marketing hype that surrounds the tactical gear market and community as a whole. As an example, a small .380 chambered pocket pistol might be great for summer EDC, but as a home-defense weapon there are better alternatives and while the pocket pistol may be “capable” of doing the job, it has features specifically optimized against the needs of the home-defense scenario. Therefore, while Walther’s marketing department may herald the PPK as a great home-defense pistol, such a claim does not hold up in a POU discussion. It was designed to be a carry-gun; therefore, it cannot also be optimized for home-defense.
The same discussions can be had of bulletproof vests and ballistic plates. Not only are different ballistic resistant materials better for certain applications, plates often vary greatly from manufacturer to manufacturer.
Of the three commonly used materials in ballistic plates (Kevlar/fiber, AR500, and Ceramic) AR500 steel is the heaviest but also the sturdiest. AR500 steel, at the end of the day, is steel, and can take a beating as a result. Unlike soft Kevlar/ballistic fiber panels, AR500 plates are typically rated at NIJ III or above, meaning they are rated to reliably stop multiple impacts of major rifle calibers 308 Win/7.62x51mm at point-blank range after being torture tested in a lab for a week. Unlike Kevlar or Ceramic plates, AR-500 steel does not deteriorate significantly after medium threat level hits, and only weakens locally after serious impacts toward its performance limit. As a result, a Level III+ AR 500 plate will be able to stop entire magazines from an AK-47 whereas a similarly, or even greater rated Ceramic plate may be seriously compromised after the first impact.
Due to its weight, AR500 is best used in situations where a degree of mobility can be sacrificed or where there will be little natural cover available. Vehicle based operations, checkpoints, and home defense are all scenarios where AR-500 would excel. All of these near stationary areas of operation are also magnets for large volume, serious fire. In a WROL situation, these places where ambushes would be the most likely to occur and staged assaults would take place. In the everyday world, having rifle protection may seem like overkill, but that is true of most vests. AR500 doesn’t make sense for undercover operations or even most plain-clothes duties like nightclub bouncing due to its weight and bulk, though some manufactures have been developing carriers that better conceal the hard plates, so that may be subject to change. AR-500 also makes sense for replacement plates for those who would already be wearing an overt plate carrier like police officers, other law enforcement, or bounty hunters handling dangerous targets.
For those who might never encounter a rifle in their life, wearing protection for one might seem ridiculous, but there are other benefits of rifle plates that carry over in to handgun performance, namely trauma reduction. While Level IIIA soft Kevlar vests can stop a 44 Magnum from penetrating, all of that energy (up to 1500 ft./lbs.) is transferred into the targets torso in an area the size of a fist. So roughly equivalent to taking a 400mph fastball to the heart. Hard plates help to distribute the force of the impact over a greater area, ideally the entire torso, so internal trauma and organ damage is significantly reduced. Hard armor thereby provides not only penetration protection, but also trauma protection. This is crucial for up-close engagements where more than one hit can be expected. If you are lying on the ground because of the impact of the bullet, your assailant will have an easy time making the second one land in an unprotected area if they are intent on killing you. With a hard plate, taking a round results in less time “out of the fight” so to speak and a greater likelihood that you will survive the internal trauma that comes with being struck by a bullet.
Whenever picking out any piece of gear, be sure to select the right tool for the job. Our Level III+ rifle vests are the toughest on the market, they will never be a Level IIA bulletproof T-shirt.
Differences in Bulletproof Vests
While the NIJ rating system makes purchasing a bulletproof vest much easier than it would be without it, the current testing parameters leave out very important metrics of comparison between different Ballistic Materials as well as individual manufacturer’s design and construction decisions.
The NIJ scale categorizes vests/ballistic plates by their ability to stop fixed, defined threats a limited number of times. It serves only as a pass/fail system, either the plate stopped all the rounds, or it did not, without any consideration as to the serviceability of the vest for future use. While this is useful to see what vests will be able to defeat various threats, it ignores durability, service life, and versatility.
Issues in the System
Ceramic plates can achieve NIJ Level 4, meaning they can stop 30 caliber armor piercing M2 bullets, yet by testing protocol 0101.06, each plate only needs to stop one round. Passing Level IV has no requirement for multi-hit capability, each plate could be rendered useless by that one round and become incapable of stopping even pistol fire and it would still pass Level IV rating. Whereas an AR500 steel plate capable of defeating similar, though lead cored, 30 caliber projectiles, must stop six impacts per plate in order to pass Level III. It is in this rather odd system that exists the possibility that a ballistic plate may pass Level IV requirements, but fail Level III. It is in this over-simplification of ballistic performance into a four level scale that many people get confused or are misled as to the real-world capabilities of the product that they are purchasing. Many opt to spend multiple times more to purchase Level IV Ceramic plates under the logic that IV is better than III, and
The manufacturer also determines the role of the bulletproof vest they produce in how they choose to make it. At its core, most AR-500 steel does not differ greatly in weight, only in compositional strength. While all AR-500 has a Brinell hardness rating of 500, that scale is only based on one test, and does not measure all of the properties and characteristics that determine a plate’s ability to stop rounds. While Hardness is probably the most important, flexibility is also critical. Just like in swords, if the plate is too brittle, the steel can shatter instead of absorbing the impact rendering the plate useless. Hence why AR600 is not nearly as common, in order to achieve the higher hardness rating, the steel becomes too brittle. Manufactures are often quick to cite the “low weight” of their plates, conveniently overlooking the actual dimensions of the strike face itself. Sure, Plate B may be 8 oz. lighter than Plate A, but if they are both made of the same material at the same thickness, then Plate B is simply smaller and therefore offers less protection. Of course, this diversity is good, those wishing to run smaller plates can do so, but having weight be the end-all differentiation between two otherwise similar plates is misleading.
While the NIJ rating of a vest is a good place to start the search for the best bulletproof vest, it should never be the final or only criteria. With the multitude of materials, cuts, and carrier designs, there is a vest out there that is perfect for your needs without breaking the bank. The ballistic protection market has exploded as of late and product diversity is at an all-time high and competition is driving prices down. There has never been a better time to invest in a bulletproof vest.
Which bulletproof vest for bugging-out vs bugging-in?
In developing prepping plans, it becomes important to focus on multiple options of preparedness. Some choose to prepare for being mobile, to get to another, safer, location. While others choose to hunker in and prepare their permanent dwelling for any potential issues. Often, it is best to develop both plans simultaneously so one has options and is therefore more prepared for a wider variety of scenarios. In each plan, the need for personal ballistic protection is ever present. However, the particular challenges and needs differ depending on whether mobility or protection is the primary objective. In this article I hope to present options for body armor that fit multiple scenarios so you and your family can be best prepared in event of a crisis.
The first scenario to cover is the most common, the “Bugging-out” plan. The premise behind this method of prepping is rather straightforward. Have supplies and gear focused on mobility to safely get to a more secure, less precarious location. This method of prepping is favored in urban population centers and suburbs where securing locations is more difficult given the higher population density. It makes sense then to relocate out of one’s apartment in the city or suburban home to a more isolated location like a cabin or rural relative’s home. The key to this kind of prepping is making it to the target as quickly and safely as possible. If the plan entails going on foot through possible dangerous terrain, weight is the primary concern. In this case a light Kevlar vest is probably the way to go. However, if one is simply driving to the target location, heavier, more protective armor is feasible. The best armor for the vehicle ex-fil is AR-500 steel plate because of its extensive protection against the vast majority of rifle fire, including the most popular assault rifles like the AR-15/10 and AK-47/74. Even mid-range sniper rifles, typically chambered in .308 Win, are ineffective against AR-500 plates. AR-500 beats more advanced ceramics for prepping because of its toughness and longevity. Ceramic plates can crack and break even when just tossed around, and with supply lines non-existent in prepping scenario, you can’t replace your plates every time you hit the deck a little too hard.
The second scenario is quite a bit different. Fortifying your present, permanent home, sometimes jokingly referred to in the prepping community as “Bugging-in” presents different challenges and opportunities. When it comes to choosing a bulletproof vest, mobility is secondary to protection. More than likely you will be in your home or on your defensed property when a threat presents itself, so the best course of action is to dig in and fight from your current position. Here the additional weight of AR-500 steel vests is no longer nearly as detrimental as in the bugging out by foot scenario presented early. Here, the added rifle protection and increased trauma protection over Kevlar can be life-saving and it costs very little in utility. As an added bonus, because AR-500 vests are extremely inexpensive compared to their ceramic counterparts, it is more economical to equip the entire family(provided they are grown enough to handle the weight) thereby multiplying force response and taking steps to ensure the safety of non-offensive family members from stray rounds.
For Prepping scenarios, AR-500 steel bulletproof vests make tons of sense in either bugging out or bugging in scenarios. Due to their maximum economy, protection, durability, longevity and ease of repair, AR-500 steel plates are ideal for prepping scenarios where replacing Kevlar or Ceramic plates after every hit would be highly impractical. So in both the short run and long run, AR500 is the ideal material for personal ballistic protection in a survival plan.